home *** CD-ROM | disk | FTP | other *** search
EISA add-on card Configuration | 1994-02-24 | 1.2 KB | 52 lines |
- BOARD
- ID="CPQ6200"
- NAME="Compaq NetFlex-2 DualPort ENET"
- MFR="Compaq"
- CATEGORY="NET"
- SLOT=EISA
- LENGTH=336
- IOCHECK=INVALID
- READID=YES
- BUSMASTER=173
- ;!#1 REV=1
-
- IOPORT(6)=0Z01Ch
- SIZE=WORD
- INITVAL=000000000000xx0x
-
- INCLUDE = "CPQ6100.OVL"
-
- FUNCTION="Hardware Revision"
- SHOW=NO
- TYPE="OTH,REVPORT"
- CHOICE=""
- FREEFORM=02h,63h,0Ch
-
- FUNCTION="Full Duplex #1"
- COMMENTS="WARNING: Enabling the Full Duplex option disables the normal
- collision detect circuitry on the Compaq DualPort Ethernet Controller.
- Full Duplex should only be enabled when connected to an Ethernet switch
- configured for full duplex operation."
- CHOICE="Disabled"
- LINK
- INIT=IOPORT(6) LOC(2) 0
- CHOICE="Enabled (10Base-T Only)"
- LINK
- ;!#2 MEMBER="FULLDPLX","01"
- ;!#2 SHARE=NO
- INIT=IOPORT(6) LOC(2) 1
-
- FUNCTION="Full Duplex #2"
- COMMENTS="WARNING: Enabling the Full Duplex option disables the normal
- collision detect circuitry on the Compaq DualPort Ethernet Controller.
- Full Duplex should only be enabled when connected to an Ethernet switch
- configured for full duplex operation."
- CHOICE="Disabled"
- LINK
- INIT=IOPORT(6) LOC(3) 0
- CHOICE="Enabled (10Base-T Only)"
- LINK
- ;!#2 MEMBER="FULLDPLX","02"
- ;!#2 SHARE=NO
- INIT=IOPORT(6) LOC(3) 1